We're Here to Help!
2SIDE SETUP
Thanks for purchasing the 2SIDE Double-Sided SUP Paddle. Take a look at the quick setup below and if you have any questions don't hesitate to email support@stageideas.com
QUICK USE TIP #1:
Keep the paddle balanced and your hands centered between the two clamps.
QUICK USE TIP #2:
Remember to keep the white logo on the blade facing outwards.
ADJUST THE PADDLE LENGTH TO YOUR HEIGHT
Use the numbers printed on the paddle or measure from the tip of the blade to the clamp on the shaft.
5'2" set both blades to 1 (~34")
5'4" set both blades to 3 (~36")
5'6" set both blades to 5 (~38")
5'8" set both blades to 7 (~40")
5'10" set both blades to 9 (~42")
6'0" set both blades to 11 (~44")
6'2" set both blades to 13 (~46")
MAKE SURE THE PADDLE LAYS FLAT
When secured into place in the shaft, make sure both paddles lay flat for the best stroke efficiency and most effective path through the water.
SECURE YOUR CLAMPS, BUT DON'T OVER TIGHTEN
Make sure clamps are not loose and screws don't pop out. A firm fit will reduce the paddle moving around while on the water. Don't tighten the screws as tight as they will go to avoid stripping.
GRAPHICS FACE FORWARD
When using the paddle, make sure the white logos on the blades face away from you to have the most efficient stroke.
DON'T LET IT SINK
Don't drop your 2SIDE in the middle of the lake! Our paddles don't float (at least not for long.) Additionally, tighten the clamps so that one end of the paddle doesn't slide out and into the deep.